Beverage multipacks are the largest application for PE shrink film. Here is what matters when specifying film for juice, soft drinks, and bottled water.
Why Beverages Use PE Shrink Film
- Strong enough to hold heavy bottle and can packs
- Shrinks cleanly in high-speed tunnels
- Clear enough for retail shelf display
- Lower cost than cardboard multipack carriers
- Compatible with automatic packaging lines
Recommended Thickness
| Pack Type | Recommended Thickness |
|---|---|
| 6-pack 500ml bottles | 45-55 microns |
| 12-pack 500ml bottles | 50-65 microns |
| 24-pack 500ml bottles | 60-80 microns |
| 6-pack 1.5L bottles | 55-70 microns |
| 12-pack cans (330ml) | 50-60 microns |
Key Requirements for Beverage Film
Clarity — The film must look good on retail shelves.
Shrink consistency — Every bundle should look identical, no wrinkles or loose areas.
Machine compatibility — Beverage lines run fast. Film must track and seal without stops.
Printing — Many beverage brands print logos, nutrition information, or promotional graphics on the shrink film.
Common Problems
Loose bundles — Thickness too low or tunnel temperature too low.
Wrinkles on cans — Film width too wide or shrink ratio mismatch.
Film breaks at high speed — Thickness inconsistency or weak edges.
Sample Testing
Every beverage line is different. We recommend testing a sample roll on your actual machine before bulk orders.
[Contact us](/contact/) with your pack configuration and machine type, or [learn about our PE shrink film products](/pe-shrink-film-manufacturer/).
