Note: This page is a case-study template. We have not yet inserted verified customer names, project volumes, cost savings or timing numbers. Every bracketed item below is a placeholder that will be replaced with real, permissioned customer feedback once our factory supplies it. Do not treat the placeholders below as verified facts.
TL;DR: We structure every customer engagement the same way: understand the challenge (surface, process, risk), propose a film solution (substrate, adhesion grade, removal window, UV), and measure the result (scratch rate, peel performance, reorder confidence). Below is the reusable template; real numbers are pending factory confirmation.
Customer profile
[Customer: e.g. German machinery manufacturer / aluminum profile extruder / appliance panel processor — placeholder, replace with a real, permissioned customer reference.]
Application: [e.g. protection of extruded aluminum profiles during transport to a window & door assembler — placeholder].
Challenge
[The incoming problem: e.g. the customer’s profiles arrived at the assembler with scuff marks from bundling, and the previous film left adhesive residue on powder-coated surfaces — placeholder, replace with the real issue.]
Key constraints we were given: [surface finish, expected on-site duration, removal condition, export packaging — placeholder].
Solution
We recommended [a medium-tack PE protective film formulated for powder-coated profiles, with the adhesion grade and removal window set to the customer’s actual transit schedule — placeholder]. Free samples were sent for a peel test on the customer’s own coated profile before any bulk order. Exact thickness, adhesion g/25 mm and UV rating are per the agreed spec sheet, to be confirmed with our factory.
Result
[Outcome: e.g. clean peel on arrival, no residue complaints at the assembler — placeholder. No project size, savings, or time-saving numbers are stated here until the customer confirms and permits them.]
Reorder status: [placeholder, to be confirmed with our factory].
What customers tell us (existing site testimonials, paraphrased)
On our homepage we already publish short customer feedback. The themes we hear — that the film peels cleanly, that samples match bulk production, and that communication on specs is responsive — are the same outcomes this template is built to document with real, attributed numbers later. Names and details remain as published on the site until we have written permission to expand them.
Want this result for your line?
Send us your substrate, process steps and the risk you are trying to remove (scratches, residue, edge lift, UV yellowing). We will send samples for a real peel test on your own material.
